Quality Inspection for Temperature And Humidity Sensor - WS-01A Intelligent Two Step Temperature And Humidity Controller – Gongyi

Short Description:

Ⅰ、Main Technical Indexs1、precision:temperature ±1.0%F·S±1b    humidity±2%F·S±1b2、Relay output contact capacity:AC220V/ 7A3、control mode:ON/OFF 4、sensor type:CU50+macromolecule5、Range of the temperature :CU50(-19.9~150℃) Range of the humidity:0~100%RH6、External dimension(mm):...


Product Detail

Product Tags

Related Video

Feedback (2)

Assume full duty to satisfy all demands of our clients; reach steady advancements by marketing the development of our purchasers; grow to be the final permanent cooperative partner of clientele and maximize the interests of customers for Rtd Sensors , 4-20ma Signal Isolator4-20ma Isolator , Electric Meters Led Display , Our mission is to allow you to create long-lasting relationships together with your consumers via the ability of marketing merchandise.
Quality Inspection for Temperature And Humidity Sensor - WS-01A Intelligent Two Step Temperature And Humidity Controller – Gongyi Detail:

Ⅰ、Main Technical Indexs

1、precision:temperature ±1.0%F·S±1b    humidity±2%F·S±1b

2、Relay output contact capacity:AC220V/ 7A

3、control mode:ON/OFF

4、sensor type:CU50+macromolecule

5、Range of the temperature :CU50(-19.9~150℃) Range of the humidity:0~100%RH

6、External dimension(mm):160×80×85    hole:156×76

7、Power supply:AC85~242V  50Hz

8、Work environment:temperature 0~50.0℃, relative humidity≤85%RH, without corrode and strong electric radiation.

Ⅱ、Instrument panel and connection scheme

1

Ⅲ、meter operater

1、You need install the humidity sensor at need test humidity’s occasion.

2、Make the meter be electrified after it connect the power、sensor and the control loop ,and then it check itself:All the shine tube strokes lighten (except OUT light),so as to test whether the luminescent system is normal。If some pieces couldn’lighten,stop using it and send to mend(the process only last for 0.5S),and then enter into the normal test control state.

3、Meter under the normal working condition:the left-above row nixie tube display the testing temperature value ,and the below row display the temperature setting value.When the testing temperature value is lower than the setting value,the temperature control output light will be lightened,and output the temperature control.The right-above row nixie tube display the testing  humidity value,and the below row display the humidity setting value,when the testing humidity value is lower than the setting value,the humidity control output light will be lightened,and output  the humidity control.

五、Parameter setting

Interior parameter Sheet

1

1、Setting temperature value:press left▲key or▼key 3s,then enter into the temperature setting state,press▲key or▼key to change the value.Long time to press ▲key or ▼key to plus and minus,after modify the parameter value,press any key on the right to save and exit or wait for 5S to save and exit automatically.


2、Setting humidity value:press right▲key or ▼key 3 second,then enter into the humidity setting state,press▲key or▼key to change the value.Long time to press ▲key or ▼key to plus and minus,after modify the parameter value,press any key on the right to save and exit or wait for 5S to save and exit automatically.

3、Setting the modify value of temperature error(SC1):simultaneity press left▲key and left▼key 3S to enter into the temperature error modify SC1 setting state,left-above row nixie tube display the parameter ‘SC1’,and the left –below row display SC1 parameter value,press▲key or ▼key to modify the parameter,Long time to press ▲key or ▼key to plus and minus,after modify the parameter value,press any key on the right to save and exit ‘SC1’setting state.then enter into the temperature return differences value ‘Hy1’setting ,left-above row nixie tube display the parameter ‘Hy1’,the left-below row display Hy1 parameter value,ress▲key or▼key to change the value.Long time to press ▲key or ▼key to plus and minus,after modify the parameter value,press any key on the right to save and exit or wait for 5S to save and exit automatically.

4、The same method(press any key on the left)set humidity return difference Hy2、humidity error moditySC2,after modify the parameter value,press any key on the left to save and exit or wait for 5S to save and exit automatically.

Wrong direction:

5、meter control:

heating control:when the temperature measure value<setting value-Hy,the meter start hearting,the light of heat is lighten.

humidity control:when the humidity measure value<setting value-Hy时,the meter start humidify control,the light of humidity lighten.

Pv window display“HH”means sensor break、the testing value is overloaded,or the type of the sensors are not matched with.;when display “LL”means the testing value excess lower-limit or the sensor should be connected wrong.


Product detail pictures:

Quality Inspection for Temperature And Humidity Sensor -
 WS-01A  Intelligent  Two Step  Temperature   And  Humidity  Controller – Gongyi detail pictures

Quality Inspection for Temperature And Humidity Sensor -
 WS-01A  Intelligent  Two Step  Temperature   And  Humidity  Controller – Gongyi detail pictures


Related Product Guide:
Cooperation

Adhering to the principle of "quality, service, efficiency and growth", we have gained trusts and praises from domestic and international client for Quality Inspection for Temperature And Humidity Sensor - WS-01A Intelligent Two Step Temperature And Humidity Controller – Gongyi, The product will supply to all over the world, such as: Singapore , Sweden , Turkey , Welcome to visit our company and factory, there are various products displayed in our showroom that will meet your expectation, meanwhile, if you are convenient to visit our website, our sales staff will try their efforts to provide you the best service
  • The factory technical staff not only have high level of technology, their English level is also very good, this is a great help to technology communication.
    5 Stars By Lesley from Sydney - 2018.09.08 17:09
    The supplier cooperation attitude is very good, encountered various problems, always willing to cooperate with us, to us as the real God.
    5 Stars By Lindsay from Leicester - 2018.06.03 10:17

    Related Products