Factory Price Electronic Temperature Controller - XMT-608 Series Universal Input Type Intelligent Temperature Controller – Gongyi
Factory Price Electronic Temperature Controller - XMT-608 Series Universal Input Type Intelligent Temperature Controller – Gongyi Detail:
XMT*608 series Intelligent Temperature Controller
Thanks for your selection of our XMT*608 series intelligent temperature controller.
XMT*608 series intelligent temperature controller,is double row 3-LED display, respectively display temperature measurement value (PV) and temperature set value (SV) under normal mode;When it is time temperature control, respectively display temperature measurement value (PV) and running time count down (SV),and also provide kinds of time control method selection;The controller can input kinds of signal which are used interchangeably,it adopt ON/OFF（P=0时）、PID control,allowing an easy parameter setting and convenient inputting,is widely used over temperature automatic control systems of machinery、chemical、ceramics、light industrial、metallurgy、petrifaction and heat treatment and so on.
Ⅱ、Main technical Indexes
1、 Measurement deviation：±0.5F·S±1，additional cold end compensating deviation±1℃
2、 Input(can be selected)：CU50(-50～150)、PT100（-80～600）、K（-30～999）、E（-30～700）、
3、 Relay output (passive) contact capacity： AC250V 5A(resistance load) period 2～120s can be adjusted.
4、 Time range：0～999s or 0～999m（can be selected）
5、 Driving solid relay signal output：Driving electric current ＞15mA no-load voltage＞12V，period is about 2S.
6、 Work power：110V～242V，50HZ Power consumption＜3W
7、 Work environment：0～50℃，relative humidity≤85％，without corrode and strong electric radiation.
1、Controller panel（for reference）2、Connection（for reference）
★Controller’s specific connection should be confirm to the case’s connection
Ⅳ、Meaning of the model code
XMT □—6 □8 □
1 2 3 4 5
1: the surface dimension
Blank: 160×80×85 Installation hole 156×76
A: 96×96×80 Installation hole 92×92
D: 72×72×80 Installation hole 68×68
E: 48×96×75 Installation hole 44×92
F: 96×48×75 Installation hole 92×44
G: 48×48×110 Installation hole 44×44
S: 80×160×85 Installation hole 76×156
B：60×120×90 Installation hole 56×116
L：Standard DIN35mm guide way installation
C：80×120×35 wall set installation
2: Operation display method：‘6’ 3-key gentle push-switch setting，double row 3-LED digital display，PID control.
‘0’ no alarm；
‘1’ upper limit alarm（upper deviation alarm when it is time temperature control）
4：Input: ‘8’ input signal can interchange free（no voltage and current input）
5：Suffix Blank：relay output G：solid relay output T：Time control function
Ⅴ、Inner parameter Sheet 5-1
1、 Make the controller link with power supply, sensor and control loop , and make the power on, the controller will start setting itself for 1S.
2、 After completing setting itself ,the controller will enter into normal measuring state，the upper row PV window display measuring value ,the lower row SV window display set value.
3、 The first menu
A、Time set value modification
Common temperature control mode: Press▲or▼for 3s to modify set value ,the upper row PV window display measurement value ,the lower row SV window display set value , press▲ or▼ to modify，long time to press can accelerate plus or minus. After modification，press SET to save and exit. If don’t press any key, it will save and exit automatically after 10s.
Time control mode：Press▲for 3s to enter into temperature set value modification state ,the upper row PV window display parameter attention “”，the lower row SV window display parameter value，press▲ or ▼to modify，long time to press can accelerate plus or minus. After modification，press SET to save and exit. If don’t press any key, it will save and exit automatically after 10s.
★B、Time set value modification（when it is time &temperature control）
Press▼for 3s to enter into time set value modification state，the upper row PV window display parameter attention “”，the lower row SV window display parameter value, press▲ or ▼to modify，long time to press can accelerate plus or minus. After modification，press SET to save and exit. If don’t press any key, it will save and exit automatically after 10s.
Inner parameter setting（detailed refer to Sheet5－1）
(1) The second menu
Press SET for 3s to enter into the second menu，the upper row window display parameter code, the lower row window display parameter value，press▲ or▼to modify，long time to press can accelerate plus or minus. After modification，press SET to save and exit. If don’t press any key, it will save and exit automatically after 10s.
(2) The third menu
Press SET +▲to enter into the third menu，setting method is the same as above.
4、 Setting itself
First set the fixed value, and then enter the menu ,set to ，At light is on，the controller enter into setting itself state, set return difference about 0.5～1，here the controller is ON/OFF control，after three times oscillation，new parameter 、、 can be confirmed and saved，AT light goes out，the controller be reset and enter into the control state.
★6、Time control function（when it is time& temperature control）：
Cut time control side at any time，time will get back to the initial state；When getting time control side, the controller will run according to setting time count down.
Ⅶ、Fault Analysis and Clearance
XMT*608 adopt advanced production process, and have the strict test before leaving factory, it improve the reliability of the meter .The usual fault caused by the wrong operation or parameter setting .If you find the fault couldn’t be cope with, please record it, and contact with the agent or us. Sheet 7-1 is the usual fault of XMT*608 in the daily application：
Sheet7-1 Common fault disposal
★Remark：Our company will improve product technology, design and specification, it is confirm to the object.
Attached 1：Statement of meter’s parameter attention letter and English letter
Product detail pictures:
Related Product Guide:
Quality comes first; service is foremost; business is cooperation" is our business philosophy which is constantly observed and pursued by our company for Factory Price Electronic Temperature Controller - XMT-608 Series Universal Input Type Intelligent Temperature Controller – Gongyi, The product will supply to all over the world, such as: Mali , Auckland , Morocco , Item have passed by means of the national qualified certification and been well received in our main industry. Our expert engineering team will often be ready to serve you for consultation and feedback. We are able to also deliver you with cost-free samples to meet your specifications. Ideal efforts will probably be produced to provide you the most beneficial service and solutions. Should you be interested in our company and solutions, please make contact with us by sending us emails or call us straight away. To be able to know our solutions and enterprise. ar more, you'll be able to come to our factory to see it. We'll constantly welcome guests from all over the world to our firm. o build business enterprise. elations with us. Please feel absolutely free to speak to us for organization. nd we believe we will share the best trading practical experience with all our merchants.
By Darlene from Slovakia - 2018.09.23 17:37
As an international trading company, we have numerous partners, but about your company, I just want to say, you are really good, wide range, good quality, reasonable prices, warm and thoughtful service, advanced technology and equipment and workers have professional training, feedback and product update is timely, in short, this is a very pleasant cooperation, and we look forward to the next cooperation!
By Cindy from Curacao - 2018.07.27 12:26