100% Original Factory S Thermocouple - OEM/ODM Manufacturer 2018 Digital Temperature Controller For Incubator – Gongyi
100% Original Factory S Thermocouple - OEM/ODM Manufacturer 2018 Digital Temperature Controller For Incubator – Gongyi Detail:
All we do is always related with our tenet ” Client first, Have confidence in 1st, devoting about the meals packaging and environmental protection for OEM/ODM Manufacturer 2018 Digital Temperature Controller For Incubator, We will wholeheartedly welcome all purchasers from the industry the two at home and abroad to cooperate hand in hand, and produce a bright foreseeable future jointly.
All we do is always related with our tenet ” Client first, Have confidence in 1st, devoting about the meals packaging and environmental protection for Data Logger For Temperature, Industrial Temperature Data Logger, Pid Temperature Controller, To win customers’ confidence, Best Source has set up a strong sales and after-sales team to deliver the best product and service. Best Source abides by the idea of “Grow with customer” and philosophy of “Customer-oriented” to achieve cooperation of mutual trust and benefit. Best Source will always stand ready to cooperate with you. Let’s grow together!
XMT*-308 Series intellgence digital temperature control instrument
XMT*-308 series intelligent temperature controller, is single row 4-LED display. The controller can input kinds of signals which are used interchangeably, three-button operation, adopts ON/OFF control and PID control. It can select Fahrenheit and degree centigrade temperature display. It allows an easy parameter setting and convenient inputting, is used widely temperature automatic control systems of machinery、chemical、ceramics、light industrial、metallurgy、petrifaction and heat treatment and so on.
Ⅱ、Main Technical Indexs
1、Measurement deviation：±0.5%F·S±1B，Cold end compensating deviation≤±2℃
2、Input(can be selected)：CU50、PT100、K、E、J、T、S
3、Relay output contact capacity：AC220V 5A(resistance load)period 2～120s can be adjusted.
4、Driving solid relay signal output：driving electric current＞15m A voltage＞9V，period is 2S
6、Work environment：temperature 0～50.0℃, relative humidity≤85%RH, without corrode and strong electric radiation.
Ⅲ、Instrument panel and connection scheme（consult）
1、 Electrify after take into the power, sensor and control circuit according to the connection scheme, and then the instrument start testing itself for 1 second.
2、 Set the setting value
Press ▲or ▼key 3 second enter to the setting value states. press▲or ▼key to modify，for long time to press the key can accelerate. After modification, press SET to save and exit. if you don’t do this operation, it can be done itself.
3、 Interior Technical parameter setting（Technical parameter refer to the sheet）
(1) The first menu
Press SET key 3 second enter into the first menu, the window display parameter code then display parameter value. Press▲or ▼key to modofy，for long time to press the key can accelerate. .After modification, press SET key to save and enter into next Indexs setting. if you don’t do this operation, it can be done itself.
(2)The second menu Press SET & ▲ key to enter into the second menu, and the setting method is the same as the first menu.
4. Set by itself
First ,set the setting value, and enter the menu, set to , and the AT light turn on，the meter enter the condition setting itself，this time the meter adopt on/off control mode, after three times surge(first time, measure value and display by turns; second time, measure value and display by turns; second time , measure value and display by turns),the meter confirm new、、 and save it, the meter reset and(display、 by turns) enter control condition.
XMT□— 3 □ 8 □
1 2 3 4 5
1:External size and Installation hole(mm)
Empty: 160×80×90 152×76 A: 96×96×90 92×92
D: 72×72×90 68×68 E: 48×96×90 44×92
F: 96×48×90 92×44 G: 48×48×100 44×44
S: 80×160×90 76×152 B: 60×120×90 56×116
K: 48×24×80 44×21 FC: 77×35×76 71×29
L：35mm DIN guide rail installation C：80×120×35 wall set installation
2.Operation display method：‘3’ 3-key soft push-switch setting, single row digital display, have PID adjustment or ON/OFF control
3: An additional alarm： ‘0’indicates no alarm；‘1’upper limit touch alarm；‘2’ lower limit touch alarm
4：Input signal classification: ‘8’input signal can interchange free
5:Suffix： empty：relay output G：solid state relay output
A：mono-phase over zero trigger output
Ⅷ、Fault Analysis and Clearance
XMT*-308 adopts advanced production process, and has the strict test before leaving factory, it improve the reliability of the meter .The usual fault is caused by the wrong operation or parameter setting .If you find the fault couldn’t be cope with, please record it,and contact with the agent or us. Sheet 8-1 is the usual fault of XMT*-308 in the daily application：
Sheet 8-1 Common fault handling
Product detail pictures:
Related Product Guide:
Our primary purpose is to give our shoppers a serious and responsible company relationship, giving personalized attention to all of them for 100% Original Factory S Thermocouple - OEM/ODM Manufacturer 2018 Digital Temperature Controller For Incubator – Gongyi, The product will supply to all over the world, such as: Mongolia , Bangladesh , Madras , Our company has built stable business relationships with many well-known domestic companies as well as oversea customers. With the goal of providing high quality products to customers at low cots, we are committed to improving its capacities in research, development, manufacturing and management. We have honored to receive recognition from our customers. Till now we have passed ISO9001 in 2005 and ISO/TS16949 in 2008. Enterprises of "quality of survival, the credibility of development" for the purpose, sincerely welcome domestic and foreign businessmen to visit to discuss cooperation.
By Muriel from Madrid - 2017.10.25 15:53
The factory can meet continuously developing economic and market needs, so that their products are widely recognized and trusted, and that's why we chose this company.
By Maggie from European - 2018.06.28 19:27